SPXL-750Q-P - Switching Power SPXL-750Q-P Power Supply. SPXL-750 Series | 0.99 PFC...
Request Quote
For Price
- Part Number:
- SPXL-750Q-P
- Model Number:
- SPXL-750Q-P
- Make:
- SWITCHING POWER INC
- Lead Time:
- Available
- Qty In Stock:
- Available
Switching Power SPXL-750Q-P Power Supply. SPXL-750 Series | 0.99 PFC Typical | 100 KHz Operation | 80% Efficiency Typical | Active Current Sharing | All Outputs Adjustable Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 0.99 PFC Typical
- 100 KHz Operation
- 80% Efficiency Typical
- Active Current Sharing
- All Outputs Adjustable
- All Outputs Monotonically Increasing
- Meets EN55022 Level A / FCC Class A
- Sizes 5"x2.5"x12.92"
Specifications
- 10% min. load required on V1 for max load reg. on outputs V2 to V4.
- 20MHz bandwidth.
- 50°C to 75°C derate 2% per °C
- Cooling: Integral fans provide a min. 50 CFM of air.
- Efficiency: 80% typical.
- EMI: Meets FCC Class A and EN55022 Level A
- Frequency: 47-63 Hz 400Hz. available.
- Fusing: 15Ampere, 250 VAC, Internal ceramic body fuse.
- Humidity: Up to 95% non-condensing.
- Input/Output: Isolation 4242 VDC, SELV construction.
- Inrush Current: Less than 50 A for 5 msec. @ 115 VAC, or 80 amperes @ 230 VAC.
- Line Regulation: ± 0.5% over operating line range, all outputs.
- Load Regulation: 1% for 0% to 100% load changes, V2-V4outputs.
- Nominal Input Voltage: 115-240 VAC.
- Operating Temperature: -20°C to 50°C, Full Output
- Operational Input: 115-240 VAC
- Overshoot: No turn-on or turn-off overshoot.
- Overtemperature Protection: Unit shuts down if overheated. Automatic recovery.
- Overvoltage Protection: V1 voltage clamp factory set at 20% to 30% above output voltage. V2, V3, V4 failsafe design.
- Power Fail: Provides a logic "0", TTL ,5msec before loss of output.
- Power Good: Provides a logic "1", TTL, for output V1 above 4.75Volts.
- Remote On/Off,shuts: Standard-Open to operate, closure to v1 return unit down.
- Remote Sense(V1& V2 output): Up to 0.5 volts total in load.
- Ripple & Noise: 1% ripple, 1% noise or 150MV which ever is greater.
- Short Circuit and Overload Protection: All outputs are protected from short circuit and overload. Automatic recovery.
- Size: 5.0"x2.5"x12.92"
- Stability: All outputs 0.5% for 8 hrs. after 1 hour warm-up.
- Transient Response: Output maximum excursion of ± 5% for 25% load step. Recovery less than 500 µsec.
- Turn on time: Less than 500 msec.
- Voltage Range: 90-264 VAC
- Weight: 7 lbs.
Applications
- None Available
Aliases
- None Available